How to Mount a Sky Q Mini Box Behind a TV

Mounting a Sky Q Mini box behind a TV is a neat way to hide wires and save space. It is safe and easy if you follow the right steps. Below is a client-friendly, step-by-step procedure you can send to anyone.

Help and Support

Quick checklist (what you need)

Sky Q Mini box and its power adapter
Short HDMI cable or right-angle HDMI adapter
VESA-mount shelf or small VESA bracket (recommended) or strong 3M VHB double-sided tape / industrial Velcro strips (alternative)
Small Phillips screwdriver (for VESA screws)
Cable ties and cable clips
Optional: HDMI extension or right-angle connector, 3–5 m power extension with surge protection
Cleaning cloth and isopropyl wipe (for adhesive method)
Measuring tape and pencil

Safety first — a few important rules

Do not block the Mini box vents. Leave at least 2–3 cm (about 1 inch) of air space around vents.
Do not stack the Mini box tightly between surfaces or inside a sealed cabinet.
If your TV is wall mounted, make sure any added bracket or shelf does not exceed the TV’s VESA or mount weight ratings. The Mini box is light, but the TV mount must remain secure.
If you are not comfortable with drilling or modifying mounts, use a non-permanent option (Velcro or small shelf).
Avoid running mains power or HDMI through sealed walls unless you follow local building/electrical codes.

Best method (recommended): Attach to TV VESA mount or VESA shelf

This is the most secure and reversible method.

Turn off and unplug the TV and Sky Q Mini box.
Remove the TV from its stand or access the back if already wall mounted so you can reach the VESA holes.
Fit a small VESA shelf/bracket to the TV’s VESA mounting bolts. Use the screws that fit your TV (most VESA kits include the right bolts). Tighten securely but do not overtighten.
Place the Sky Q Mini box on the shelf and secure it with the bracket’s retaining strap or use a short Velcro strap so it cannot slip.
Plug the short HDMI cable from the Mini box into the TV’s HDMI input. Use a right-angle adapter if space is tight.
Plug in the Mini box power lead. Route the cable down the TV mount using cable ties or clips so it reaches the nearest socket or power extension.
Leave 2–3 cm clearance around the Mini box vents. Do not press it flush to the TV back.
Re-mount the TV (if you removed it) and set the TV input to the correct HDMI. Power the Mini box and test video, audio and remote control.

Alternative non-invasive method: Velcro or industrial adhesive

Use when you cannot access VESA holes or do not want to change the mount.

Clean both the TV back and the Mini box base with the isopropyl wipe. Let dry.
Apply 3M VHB strips or industrial Velcro to the box and corresponding spots on the TV back. Use multiple strips for a secure hold.
Press firmly for the recommended time (follow the adhesive instructions).
Route cables neatly and test the box.
Warning: Adhesive can damage the TV finish when removed and may lose strength over time with heat. This method is not ideal for long-term mounting in hot locations.

Cable routing & neatness

Use short, right-angle HDMI cables behind the TV to reduce stress on ports.
Bundle and secure cables with cable ties or Velcro straps.
Use a cable raceway or flat cable covers to hide visible cables down the wall or to the power socket.
If you need to run HDMI through a wall, use a rated in-wall HDMI extension kit and follow local codes.

Remote control & operation

Test the remote after mounting. Most Sky Q remotes use RF (so they do not require a direct line of sight), but some TV functions use IR.
If TV power/volume don’t respond, you may need the TV IR sensor to remain visible. Use a small IR extender/IR blaster if needed.
If the Mini box is placed where wireless signal is weak, try a short reposition or use the supplied network options (Ethernet) for stability.

Final testing checklist

Power on TV and Sky Q Mini box.
Select the HDMI input used by the Mini box.
Confirm picture and sound are good.
Test remote functions: channel, guide, back, home, volume (if programmed).
Leave the Mini box on for 10–15 minutes and check for excessive heat. If it becomes too hot, move it to allow more airflow.

Troubleshooting quick tips

No picture: recheck HDMI connection and TV input. Try another HDMI port.
No sound: check TV audio input and box audio settings.
Remote not working: replace batteries and test near the box. If IR functions fail, try an IR extender.
Overheating: remove box from tight space and increase airflow.